Top 8 ATmega328P with Arduino Bootloader – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. GAOHOU

#ad

GAOHOU DIY ATmega328P Development Board for Arduino UNO R3 with Arduino bootloader

#ad
GAOHOU #ad - Package includes: 1 x atmega328p development board. You can use ft232 usb to ttl module, CH340G module, to burn the program. Microcontrollers: ATmega328P-PU. It uses a locking seat, so it is easy to replace the chip. 100% compatible with arduino UNO R3 program, expansion shields, development environment IDE. It has been burned arduino UNO bootloader. Programming interface: gnd, RX, 5V, TX and DTR.
BrandGAOHOU #ad
ManufacturerAETXJS #ad
Part NumberAEJS018

2. risingsaplings

#ad

Risingsaplings 2pcs ATMEGA328P-U with UNO R3 bootloader and IC Socket

#ad
risingsaplings #ad - 2 are equipped with the original aTmega328P-PU chip, and the Bootloader program of Uno R3 has been pre-installed. It comes with an ic socket that you can use directly on the breadboard and other environments. 100% test with professional tools that can be used to replace your burned atmega328p-pu chip of the Uno R3 board. 100% compatible with arduino ide program, directly installed on UNO R3 board can be used note that ATmega16U2 is not burned. You can save time and money by buying Atmega328 with the boot loader installed and 100% tested instead of doing it yourself.
Brandrisingsaplings #ad
Manufacturerrisingsaplings #ad
Height0.59 Inches
Length2.36 Inches
Width3.15 Inches
Part Number13

3. Ximimark

#ad

Ximimark AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3

#ad
Ximimark #ad - On-board buzzer and led indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. Package included: 1 x aVR ISP Shield Burning Bootloader. If you are not satisfied with your purchase for any reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply. According to open-smart user manual, it is very easy to use. This is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.
BrandXimimark #ad
ManufacturerXimimark #ad
Part NumberLY290

4. ELEGOO

#ad

ELEGOO UNO R3 Board ATmega328P with USB CableArduino-Compatible for Arduino

#ad
ELEGOO #ad - Clear prints on the female header connector, more precise and easier to use the wire. Faster transfer rates and more memory. Control using atmel atmega+328p chipthe same with Arduino UNO R3. We have always cared about the customer experience and improve the product function details. 100% compatible with the Arduino IDE and RoHS Compliant. The elegoo uno r3 board now uses an 16u2 instead of the ATMega8U2 chip.
BrandELEGOO #ad
ManufacturerELEGOO #ad
Height0.39 Inches
Length3.15 Inches
Weight0.06 Pounds
Width2.36 Inches
Part NumberEL-CB-001
ModelEL-CB-001
Warranty6 MONTHS

5. ELEGOO

#ad

ELEGOO Nano Board CH340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO #ad - Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, ATN, RX, GND on one top, so users have more breadboard space.

It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Use the driver from above link. It is a smallest, complete, and breadboard friendly board. The power source is automatically selected to the highest voltage source. It's got a pin layout that works well with the Mini or the Basic Stamp TX, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. The nano is using the chips atmega+328p and cH340, not FT232 as official Arduino, so pls.
BrandELEGOO #ad
ManufacturerELEGOO #ad
Height0.7 Inches
Length1.9 Inches
Weight0.01 Pounds
Width0.4 Inches
Part NumberEL-CB-005
ModelEL-CB-005

6. REXQualis

#ad

Compatible with Arduino Nano V3.0 Nano x 3 with 3 Cable, 3pcs Nano Board CH340 / ATmega328P with USB Cable, REXQualis Nano V3.0

#ad
REXQualis #ad - Rexqualis nano is a smallest, complete, and breadboard friendly board. Rexqualis nano is using atmel atmega328p-au mcu, support ISP download and USB download, Power via the Mini-B USB.

The power source is automatically selected to the highest voltage source. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Rexqualis nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper.
BrandREXQualis #ad
ManufacturerREXQualis #ad
Part NumberRQ-NANO-01

7. DORHEA

#ad

DORHEA for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board Nano 328P Nano 3.0

#ad
DORHEA #ad - It's got a pin layout that works well with the Mini or the Basic Stamp TX, RX, GND )on one top, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

It has everything that arduino/genuino UNO has electrically with more analog input pins and on board +5V AREF jumper. Additionally, each of which provide 10 bits of resolution. By default they measure from ground to 5 volts, some pins have specialized functionality. The power source is automatically selected to the highest voltage source. This board is using the chips atmega328P and CH340, not FT232 as official Arduino.

It is a smallest, complete and breadboard friendly board. The nano has 8 analog inputs, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins. More breadboard space:nano's got the breadboard-ability of the boarduino and the mini usB with smaller footprint than either, ATN, so users have more breadboard space.
BrandDORHEA #ad
ManufacturerDorhea #ad

8. LAFVIN

#ad

Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE Nano x 3 with USB Cable

#ad
LAFVIN #ad - Works the same as original Nano, runs perfectly on programming software. Using atmel atmega328p-au mcu, support ISP download; Support USB download and Power. Improved new version CH340G Replace FT232RL. Original atmega328p ch340 chip is used. Lafvin nano ch340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila. Lafvin nano v3. 0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
BrandLAFVIN #ad
ManufacturerLAFVIN #ad
Weight0.01 Pounds
Part NumberLA-020
Model8541582500