Top 10 UCTRONICS PoE Splitter Gigabit 5V – Powerline Computer Network Adapters

As an Amazon Associate I earn from qualifying purchases.

1. UCTRONICS

#ad

Micro USB Power and Ethernet to Raspberry Pi 3B+, Most Micro USB Security Camera and Tablet, IEEE 802.3af Compliant, Work with Echo Dot, UCTRONICS PoE Splitter Gigabit 5V

#ad
UCTRONICS #ad - Compatible with Raspberry Pi case with fan or add-on screen. Extend powerline - deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE Power over Ethernet from up to 400 feet.

Note: an 802. 3af compliant poE injector/switch is required to use this device not included. Replace power supply - remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices. 5v/2. 4a & 1000mbps - power micro-usb devices via an Ethernet cable, along with gigabit data transfer which you can put aside if you only need power. Save your time - plug and play compatibility and quick seller response. Poe hat alternative - use no gpio pins. Support raspberry Pi 3b+ and previous models.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Height1.97 Inches
Length3.15 Inches
Width0.59 Inches
Part NumberU515902
ModelU515902

2. UCTRONICS

#ad

Active PoE to Micro USB Adapter, IEEE 802.3af Compliant, and More, for Tablets, Dropcam and Raspberry Pi 2/3, UCTRONICS for Raspberry Pi PoE Splitter 5V 2-Pack

#ad
UCTRONICS #ad - These are not included in our package. Reportedly used on micro usb devices like raspberry pi, chromecast, Echo Dot 2nd Gen, ASUS Tinker Board, Arlo 2 Pro, Amazon Ethernet Adapter for Fire TV, Amazon Cloud Cam, and so on. Note - 1: just put the split ethernet aside if you don’t need the data. What else is needed - you need an ieee 802.

3af compliant poe switch or injector to serve as the PSE Power Source Equipment, an Ethernet cable with the proper length you need, and devices powered via micro USB. 3: the split ethernet cable does not carry power, check b01mdluse7; for gigabit poe switch or a Raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, but you can add a USB Ethernet adapter to it if your device takes network from USB. What’s special about it - poe to micro usb. What is it - a 5v uctronics poe splitter to split the poe signal into micro usb power supply and ethernet in rj45, wyze cam v2, nano pi, so that non-PoE devices can be powered over Ethernet.

What is poe - poe enables you to deliver power and data with a single ethernet cable, and thus fewer wall plugs are needed and fewer cables are messed. It also helps you extend powerline to where there are no AC outlets nearby but your Ethernet cable can reach, up to 300 feet away from the power source. It makes full use of poe switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device. That means it adds plug-and-play poe support to raspberry pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Height0.94 Inches
Length6.69 Inches
Width4.72 Inches

3. UCTRONICS

#ad

UCTRONICS USB-C PoE Splitter Gigabit, PoE to USB-C 5V/4A Power Supply for Raspberry Pi 4 and More, 802.3at Power Over Ethernet to USB Type-C Adapter

#ad
UCTRONICS #ad - Note: 1. Make full use of each port on your PoE switch. And you want to deliver power and transfer data with a single Ethernet cable, this might be helpful for you, but it does NOT support QC or PD protocols. Ieee 802. 3at poe switches or injectors recommended for a larger power budget.

You need a poe switch or injector better with 802. 3at and 2 ethernet cables a longer for PoE input and a shorter patch cable optional for Ethernet. Work with 802. 3af poe switches but will not output more than 2. 5a. Other type c uses: if you have a network device powered by usb-c router, or you’ve already had a PoE connection but want to use a USB-C 5V device with it, camera, etc. You might want to check PoE switches and USB-C PoE splitters. How to keep the poe setup on pi 4 stable and steady if you are on a power-hungry application? Just go with a 5V/4A PoE splitter.

Poe to usb-c: poe signal adapted to usb-c power and ethernet connection. The 5v usb-c power is adapted from a 5. 5x2. 1mm barrel port, and you can adapt it to other ports if you get the right adapter. Raspberry pi 4 compatible: the latest raspberry pi model is powered via a usb-c port, but sometimes you just dislike the wall chargers, especially when you have multiple Pis running at the same time and the adapters eat and intrude your whole power strips.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Part NumberUCT_U5259
ModelUCT_U5259

4. UCTRONICS

#ad

UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets, Dropcam or Raspberry Pi 48V to 5V 2.4A

#ad
UCTRONICS #ad - Suitable for android tablets, dropcam, raspberry Pi – Micro USB. Power output port: 5v 2. 4a micro usb Power Plug. For gigabit poe switches users, 48v unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, gigabit splitter U515902 is recommended. Compatible with 44-57V DC voltage, overvoltage protection. Support ieee 8203af poe switch, 48v injector. 12 watt micro usb power over ethernet poe up to remote 328-492ft 100-150m via Ethernet cable, 802. 3af poe switch or 48v injector is needed. 2-pack: b07qprvM51.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Height1.97 Inches
Length3.15 Inches
Width0.59 Inches
Part NumberUCT_U5159
ModelU5159

5. UCTRONICS

#ad

And More, Google Mini, UCTRONICS for Raspberry Pi Zero Ethernet and Power, Chromecast, IEEE 802.3af Compliant, Micro USB Ethernet/PoE Adapter for Fire TV Stick

#ad
UCTRONICS #ad - Note: 1. How does it work – by converting poe power over Ethernet signal, or combining plain Ethernet and Micro-USB power supply, into Power&Ethernet over USB. For raspberry pi zero, plug into the micro usb port marked “usb” instead of “pWR.

2. What is poe – deliver power and data with a single ethernet cable for fewer wall plugs and messed cables. What else needed - you need an ieee 802. 3af compliant poe switch or injector for the PoE mode, or an extra Micro-USB power supply for plain Ethernet combining. What is it – an adapter that helps you deliver both power supply and solid wired network connection to a single Micro-USB port.

Make sure the poe input is connected to a functioning IEEE802. 3af compliant poe switch that has internet connectivity and power over Ethernet on PoE mode. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad

6. TP-Link

#ad

TP-Link PoE Splitter 802.3af Compliant Gigabit Port 5/9/12V DC Power Output Up to 100 meters325 feet TL-PoE10R, Black

#ad
TP-Link #ad - Ieee 802. Gigabit Ethernet ports. Plug-and-play - Require no configuration. 5/9/12v dc power output. Gigabit Ethernet ports. Ieee 802. 3af compliant. Technical support: +1 866 225 8139; hotline en Français: +1 855 987 5465. Industry-leading 2-year and unlimited technical support. 3af compliant. Plug-and-play - Require no configuration. 1 feet100 meters. Deliver power up to about 328. 1 feet100 meters. 5/9/12v dc power output. Deliver power up to about 328.
BrandTP-Link #ad
ManufacturerTP-LINK USA #ad
Height6.61 Inches
Length8.15 Inches
Weight10 Pounds
Width2.68 Inches
Part NumberTL-POE10R
ModelTL-POE10R
Warranty2 year - parts & labor

7. ANVISION

#ad

Plug 3.5mm x 1.35mm, IEEE 802.3af Compliant, for IP Camera and More, ANVISION 2-Pack 5V Gigabit PoE Splitter, 48V to 5V 2.4A Adapter, 5.5mm x 2.1mm Connector

#ad
ANVISION #ad - Input: ieee 802. 3af dc44-56v from poe switch or poe injector. Application: works with non-poe network devices that require a 5V dc input and a ethernet input, such as IP camera and more. Plug and play: require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. Output: 5v dc power out 5v 2. 4a 12watts max. 5. 5mm x 2. 1mm, plug 3. 5mm x 1. 35mm, 10/100/1000mbps ethernet data. Warranty: 2 years and unlimited technical support, Package content: 2x 5V PoE splitter.
BrandANVISION #ad
ManufacturerANVISION INC #ad
Part NumberAV-PS05-G2
ModelAV-PS05

8. AuviPal

#ad

802.3af/at Compliant | AP-POE-USBC, AuviPal USB-C Gigabit PoE Splitter, PoE to USB Type-C 5V/4A Max Power + 10/100/1000Mbps Ethernet Data Adapter for Raspberry Pi 4 and More

#ad
AuviPal #ad - It utilizes the optimal poe module solution with isolation transformer + Standard PD Powered Devices chip. Please note: you need to buy extra "usb-c female to micro usb male adapter" for raspberry pi 1b, such as Pi 1B, 1B+, 3B, 3B+, 2B, 3B+, 3A+, 2B, 1B+, 3B, 3A+ which has a Micro USB power interface.

Split poe siganl into ethernet date 1000mbps max and usb-c dc power 5v/4a max, fully complies with ieee 802. 3af/at poe switch or injector required but not included, Output 20W max 5V/4A at 802. 3at and 12. 5w max 5V/2. 5a at 802. 3af through USB Type-C connector. Set it up in seconds without any extra effort or configuration. Please note: it does not support qc or pd fast charging protocols, Besides, Phone, we suggest you buy IEEE 802.3

3at poe switch or injector Which can output max 20W 5V/4A first! Poe hat alternative - alternative way to achieve poe function for all models raspberry pi which has network interface, 4b. Plug and play - simply connect the ethernet and power cables, then you are ready to go. Run your raspberry Pi and other USB-C devices more stable and safer. And no need to dismount raspberry pi case or add-on screen anymore by using AuviPal USB-C PoE Splitter.
BrandAuviPal #ad
ManufacturerAuviPal #ad
Height0.98 Inches
Length3.15 Inches
Width1.77 Inches
Part NumberAP-POE-USBC
ModelAP-POE-USBC

9. TRENDnet

#ad

1 x Gigabit Output Port, Adjustable Voltage Output Supports 5V, 9V, Up to 100m 328 ft., 1 x Gigabit PoE Input Port, TRENDnet Gigabit PoE Splitter, TPE-104GS, Wall Mountable, 12V Devices, PoE Powered

#ad
TRENDnet #ad - Data transfer rates: ethernet: 10mbps half duplex, 20mbps full duplex; Fast Ethernet: 100Mbps half duplex, 200Mbps full duplex; Gigabit: 2000Mbps full duplex. Wall mountable: wall mountable design of the PoE Splitter accommodates most installation scenarios.

The included combination 2. 0 and 2. 5mm jumper cable provides greater device compatibility. Adjustable voltage output: convenient dip-switch adjusts voltage output to 5V, 9V, or 12V in order to match non-PoE device power requirements. Gigabit ethernet device interface: 1 x gigabit data/power port in; 1 x Gigabit data out port; 1 x DC Power out port; LED indicators; Adjustable output power DIP switch 5V, 9V, 12V. Poe power: no power adapter necessary; the gigabit poe splitter takes a PoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m 328 ft.
BrandTRENDnet #ad
ManufacturerTRENDnet #ad
Height5 Inches
Length6 Inches
Weight0.06 Kilograms
Width2 Inches
Part NumberTPE-104GS
ModelTPE-104GS
Warranty3-year warranty

10. ANVISION

#ad

IP Camera and More, Compatible with Raspberry Pi 3B+, 48V to 5V 2.4A Micro USB Ethernet Adapter, ANVISION 2-Pack Gigabit PoE Splitter

#ad
ANVISION #ad - 5v dc power output 2. 4a / 12watts max. 10/100/1000mbps ethernet data rate, IEEE 802. 3af compliant. Plug-and-play - require no configuration, a simple solution to expand your network to where you wish to place network devices but has no power outlet. Input power voltage: dc44-56v from poe switch or poe injector, deliver power up to about 100m 328 feet. 2-years warranty and unlimited technical support, Package content: 2x PoE gigabit splitter. Works with raspberry pi 3b+ and previous models / Tablets / IP Camera / Dropcam or other devices with 5V Micro USB input.
BrandANVISION #ad
ManufacturerANVISION INC #ad
Height1.36 Inches
Length2.69 Inches
Width1.96 Inches
Part NumberAV-PS05-G-2
ModelAV-PS05 USB-G-2