As an Amazon Associate I earn from qualifying purchases.
GeeekPi #ad - This raspberry pi mini tower nas kit contains an m. 2 sata ssd expansion board which can expand the mass storage for your Raspberry Pi. Package includes: 1 x abs mini tower case, 1 x ice-tower cpu cooling fan, 1 x 096inch oled display already mounted on the case, 1 x M.
2 sata ssd shield, 2 x acrylic side panel, 1 x gpio edge expansion board, 1 x Assembly manualNote: Raspberry Pi 4B is Not included in the package. Note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.
Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2. The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host. Sata ssd solid-state drive.
GeeekPi #ad - 5mm copper tube;Super heat dissipation. Dc 5v power in can be powered by the Raspberry Pi. Ice tower Structure;Easy to setup. Rated power 04w @5v, 008a. Super cool fan background light Multicolor.
SunFounder #ad - Cooling 4 chips - with a good cooling effect, the cooling base also covers the RAM, not just the CPU, LAN and USB chips. Super cooler - ambient temperature 25°c raspberry pi 4 model b 2gb version Idle Test: around 29°C; Full Load: less than 37°C; Overclock 2147 MHz : less than 46°C.
Sunfounder icecube- compatible with raspberry pi 4 B and Raspberry Pi 3 B+, plug and play, easy to assemble, no drive or software needed.
GeeekPi #ad - Super cool fan background light. Package includes:1 x 5-layer acrylic case, 1 x ice tower radiator and Fan, 1 x 4010 Fan kitscrews and nuts, 1 x anti-slipper pads, 1 x mini screw driver, 2 x steel Mounting Fixer, 2 x M2.
GeeekPi #ad - Only for raspberry Pi 4 Model B. Super cool fan background light Multicolor. Package includes:1 x 5-layer acrylic case, 2 x steel mounting fixer, 1 x 4010 Fan kitscrews and nuts, 1 x Ice Tower radiator and Fan, 1 x anti-slipper pads, 1 x mini screw driver, 2 x M2.
GeeekPi #ad - Fan features: color led fan with automatic color change;single-stack tower-style heatsink;DC 5V Power in Can be powered by the Raspberry Pi;Only Fan, please refer to ASIN: B07ZV1LLWK.
Raspberry pi low-profile cpu cooler kit for raspberry Pi 4 Model B;Black Version, please refer to ASIN: B08CVDRCKT. 5mm copper tube;super heat dissipation;Plug and play;Rated power 04w @5v, 008a.
GeeekPi #ad - Package includes: 1 x abs mini tower case, 1 x ice tower cooler, 2 x acrylic side panel, 1 x 0.96 inch oled displayalready mounted on the case, 1x GPIO Edge Extention, 1x Assembly Manual Note: Raspberry Pi 4B is Not included in the package.
Only compatible with raspberry pi 4b. For 3b+/3b version, please refer to ASIN: B0B81G6FPC. Abs mini tower case is made of abs material, and the interior of the shell includes a design for arranging cables, and the 45-degree OLED screen display angle is more convenient to observe system information.
The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs. The interface adopts with a fool-proof design to avoid problems caused by wrong wiring, the installation is simpler and more convenient. The screen holder adopts a quick-release design, with very high precision, which is convenient for arranging cables.
XYGStudy #ad - Part number: ice tower Fan V2 for Pi. Rated power 04w @5v, 008a, elaborately tuned fan lower noise, higher performance. Low-profile ice tower cooling fan for raspberry Pi 4B/3B+/3B, 5mm Copper Tube, Colorful LED.
GeeekPi #ad - 5mm copper tube;super heat dissipation;Rated power 04w @5v, 008a. Compatible with raspberry pi 4B and Raspberry Pi 3 Model B / Model B+. The official raspberry Pi OS supports the speed adjustment function.
GeeekPi #ad - Rated power 04w @5v, 008a;dc 5v power in Can be powered by the Raspberry Pi. Ice tower structure;easy to setup; raspberry Pi 4 Case with ICE Tower Fan: B07ZCX5KG6. 5mm copper tube;Super heat dissipation. Super cool fan background light Multicolor.
1. GeeekPi
#adRaspberry Pi ICE Tower Cooler with PWM RGB Fan, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B, M.2 SATA SSD Expansion Board, GeeekPi Raspberry Pi Mini Tower NAS Kit
#ad2 sata ssd shield, 2 x acrylic side panel, 1 x gpio edge expansion board, 1 x Assembly manualNote: Raspberry Pi 4B is Not included in the package. Note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.
More information #ad
Please purchase M. 2 sata ssd 2280 mass storage device, it dose not support nvme ssd!!! note: the rgb light on fan and mood light will not light up unless installed driver, and oled will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it. Please purchase M. 2 sata ssd 2280 mass storage device, it dose NOT support NVME SSD!!! M. 2 sata ssd 2280/2260/2240 mass storage adapter board, supports up to 2TB M2. The case is made of abs material, This kit turns your Raspberry Pi into a mobile mini-host. Sata ssd solid-state drive.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Warranty | no |
More information #ad
2. GeeekPi
#adRaspberry Pi ICE Tower Cooler, GeeekPi Raspberry Pi Cooling Fan, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B Black
#adMore information #ad
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | EP-0107 |
More information #ad
3. SunFounder
#adQuiet Cooling Fan Radiator for Raspberry Pi 4 Model B 3B+, SunFounder Raspberry Pi Cooling Fan, Raspberry Pi Heatsink, Raspberry Pi Ice Tower Cooler, Cooling 4 Chips with RGB LED
#adSunfounder icecube- compatible with raspberry pi 4 B and Raspberry Pi 3 B+, plug and play, easy to assemble, no drive or software needed.
More information #ad
Silent rgb led fan - speed: 3500rpm; air flow: 2. 46cfm; noise level: 22. 32dba; rated Power: 04w @5v, 008a, quiet better. Ice tower structure - 28 aluminium Fins and 5mm Copper Pipe provide effectively excellent heat dissipation.| Brand | SunFounder #ad |
| Manufacturer | SunFounder #ad |
| Height | 1.97 Inches |
| Length | 4.33 Inches |
| Width | 2.95 Inches |
| Warranty | 1 Year |
More information #ad
4. GeeekPi
#adGeeekPi Raspberry Pi 4 Case with ICE Tower Cooler CPU Cooling Fan,Raspberry Pi 4 Case with Fan Raspberry Pi Heatsink Raspberry Pi Fan Raspberry Pi Case for Raspberry Pi 4 Model B
#adMore information #ad
0 screws. Only for raspberry Pi 4 Model B. Ice tower Structure;Easy to setup.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | K-0401 |
More information #ad
5. GeeekPi
#adRaspberry Pi 4 Case with Fan Raspberry Pi Heatsink Raspberry Pi Fan Raspberry Pi Case for Raspberry Pi 4 Model B, GeeekPi Raspberry Pi 4 Case with Raspberry Pi ICE Tower Fan RGB Cooling Fan
#adMore information #ad
0 screws. Rated power 04w @5v, 008a;dc 5v power in Can be powered by the Raspberry Pi. Ice tower Structure;Easy to setup.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | K-0503 |
More information #ad
6. GeeekPi
#adGeeekPi Raspberry Pi 4 Metal Case with Fan, Raspberry Pi 4B Case with Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Horizontal ICE Tower Cooler Silver
#adRaspberry pi low-profile cpu cooler kit for raspberry Pi 4 Model B;Black Version, please refer to ASIN: B08CVDRCKT. 5mm copper tube;super heat dissipation;Plug and play;Rated power 04w @5v, 008a.
More information #ad
Metal case features:it not only provides good protection to your Raspberry Pi and also offering excelent heat dissipation. Only case, please refer to ASIN: B085HFTMB1. Package includes: 1 x metal case, 1x 40-pin gpio 1 to 2 expansion board, 1 x Ice Tower Cooler, 1 x Screwdriver, 1 x Instructions; Note: Raspberry Pi Board is Not Included.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | K-0522 |
More information #ad
7. GeeekPi
#adGeeekPi Raspberry Pi Mini Tower Kit, 0.96'' OLED Module, RGB Cooling Fan, Raspberry Pi 4 Case with ICE Tower Cooler, Raspberry Pi Heatsink,GPIO 1 to 2 Expansion Boardfor Raspberry Pi 4B
#adOnly compatible with raspberry pi 4b. For 3b+/3b version, please refer to ASIN: B0B81G6FPC. Abs mini tower case is made of abs material, and the interior of the shell includes a design for arranging cables, and the 45-degree OLED screen display angle is more convenient to observe system information.
More information #ad
The ice tower radiator included in the kit can not only provide good heat dissipation, but also increase the appearance. The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs. The interface adopts with a fool-proof design to avoid problems caused by wrong wiring, the installation is simpler and more convenient. The screen holder adopts a quick-release design, with very high precision, which is convenient for arranging cables.
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Warranty | no |
More information #ad
8. XYGStudy
#adLow-Profile ICE Tower Cooling Fan for Raspberry Pi 4 3 Model B B+ Super Heat Dissipation 5mm Copper Tube Powerful RGB Colorful LED More Efficient @XYGStudy
#adMore information #ad
Color led fan with automatic color change, make it more dazzling and gorgeous. Large area cooling fins and directly-contacted copper tube, super heat dissipation reducing the temperature of the Raspberry Pi from 80℃ to 40℃ while overclocking.| Brand | XYGStudy #ad |
| Manufacturer | XYGStudy #ad |
More information #ad
9. GeeekPi
#adRaspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B Silver, GeeekPi Raspberry Pi 4 PWM Fan
#adMore information #ad
Support pwm speed regulation - this fan can be adjusted by pwm. Color led fan with automatic color change. You can also control the speed of the fan by controlling the GPIO pin through a third-party program. Dc 5v power in can be powered by the Raspberry Pi.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Weight | 0.33 Pounds |
| Part Number | EP-0122 |
More information #ad
10. GeeekPi
#adRaspberry Pi ICE Tower Cooler, GeeekPi Raspberry Pi Cooling Fan, RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B
#adMore information #ad
| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | EP-0107 |
| Model | UYH6 |
More information #ad
