Top 10 mATX Case with Fans – Computer Cases

As an Amazon Associate I earn from qualifying purchases.

1. MOROVOL

#ad

MOROVOL Mesh Matx Micro-ATX Case Tower Computer Case, 2PCS × ARGB Fans Preinstalled and 2×USB 3.0 Ports, Magnetic Design Opening Tempered Glass Panel & Mesh Front Panel Gaming PC CaseTW7-S2-BL

#ad
MOROVOL #ad - Note: 12v 4pin motherboard is not suitable for motherboard control mode, and it is recommended to use button control only. The high light-transmitting glass side panels showcase your computer's ARGB colors. Proper interior spacethis micro atx mid tower case provides an appropriate space to build your system and manage the cables.

Extraordinarily cooling systemboth of the front panel and the top is mesh for optimal cooling performance, and the case is pre-installed 2pcs ARGB fans that provides strong airflow to the pc case for optimal cooling performance. Each addressable ARGB fan offers 16. 8 million colors to create a stunning lighting effect. It is equipped with expensive magnetic tempered glass side door and a dust filter at the bottom of the case. There is no doubt that this gaming pc case is a good choice for you to build a high-end computer.

Dedicated led buttons can be used to control 19 lighting modes for ARGB fans. Door opening designthe morovol matx case with tempered glass side panel possessing magnetic buckle is easy to install the hardware, and can be opened at any time, improving the ultimate thermal effect, which improves 84% of the cooling effect than the non-opening panel case. Excellent lighting effects this pc case included a argb controller and 2pcs argb fans. Top i/o panelthe micro pc case tw7 is designed with 2 x usb3. 0 ports for faster transfer speed.
BrandMOROVOL #ad
ManufacturerMOROVOL #ad
Height15.23 Inches
Length13.78 Inches
Weight9 Pounds
Width7.87 Inches
Part NumberTW7-S2-BL
ModelFor MICRO-ATX/ITX
Warranty1 years warranty

2. Thermaltake

#ad

Thermaltake V150 TG Breeze ARGB Motherboard Sync mATX Computer Case with 3x120mm 5V ARGB Fan Pre-Installed, Ventilated Front Mesh Panel, CA-1R1-00S1WN-02, Black, Tempered Glass Side Panel

#ad
Thermaltake #ad - Magnetic dust cover. Three preinstalled 120mm ARGB fans. Mesh front panel design. Tempered Glass Panel. Supports mini-itx, Micro-ATX Motherboard.
BrandThermaltake #ad
ManufacturerThermaltake #ad
Height15.67 Inches
Length17.32 Inches
Weight12.2 Pounds
Width8.19 Inches
Part NumberCA-1R1-00S1WN-02
ModelCA-1R1-00S1WN-02
Warranty3 Year Manufacturer

3. Bgears

#ad

Bgears b-Voguish Gaming PC with Tempered Glass ATX Mid Tower, mATX, Support E-ATX, USB3.0, ATX, ITX. Note: Fan NOT Included in This Model. Only b-Voguish-RGB ASIN# B08W2MXBQJ Come with ARGB Fans

#ad
Bgears #ad - 5mm thickness tempered glass Side window panel. Support water-cooling front-240mm top-240mm rear-120mm. Country of origin : China. Package weight : 15. 3 lbs.
BrandBgears #ad
ManufacturerBgears #ad
Height19.37 Inches
Length8.07 Inches
Width15.94 Inches
Part NumberBG01893
ModelBG01893
Warranty1 year

4. Zalman

#ad

MATX ITX for Gaming Workstation, Pre-Installed 120mm Fan, 5.25 ODD, USB 3.0, Black, Patterned Mesh Design, Zalman T6 ATX Mid Tower Computer PC Case

#ad
Zalman #ad - Will fit atx, office, and mini-ITX motherboards. Powder coated steel – the t6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant.

Versatile layout – t6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, mATX, or gaming. Optimized cooling performance – hairline pattern front and side mesh design along with 120mm rear fan provides optimal air circulation. Bays and ports: 2 2. 5” and 2 3. 5/2. 5" drives, 1x audio in, i/o port with 1x usb 3. 0, 2x usb 2. 0, external bay for a 5. 25" drive, 1x Audio Out. Caution: this case will not fit ATX motherboards with side-facing SATA ports. Total of 4 fans can be installed, including on the side panel.
BrandZalman #ad
ManufacturerZalman #ad
Height14.84 Inches
Length7.87 Inches
Weight8 Pounds
Width16.93 Inches
Part NumberT6
ModelT6
Warranty1 Year

5. MUSETEX

#ad

MUSETEX Mesh MATX Micro-ATX Case 5 PCS ARGB Fans Pre-Installed 2 × USB 3.0 Ports, Opening Tempered Glass Panel Airflow Micro-ATX / Mini-ITX Tower Gaming PC Case MK7

#ad
MUSETEX #ad - Top i/o panelmusetex mid-tower micro-atx pc case designed with 2 x usb 3. 0 port, power, 2 x hd audio, LED Button, Reset. Multiple argb modes button control has 19 lighting modes ;motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only.

The internal space is wide and easy to install 3 x 2. 5" ssd ;2 x 3. 5" hdd;micro-atx/itx motherboard; 120mm/240mm/280mm water cooling; maximum length 340mm GPU(installing vertically or horizontally); maximum length 180mm CPU air cooling; maximum length 200mm PSU. Our usb cable is shielded wire so that you can transmit data without interference. Dust-proof designthe matx pc case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. Motherboard compatability: micro-ATX/ Mini-ITX motherboards(Not for ATX motherboard).

More spacemusetex mk7 series has 4mm tempered door opening design and mesh front panel, make it easy and free to disassemble and install computer accessories, and allow maximum airflow to provide cooling for your power supply. Outstanding airflowlarge front panel metal mesh and 5pcs 120mm musetex argb fans are pre-installed for the case to provide lighting and excellent airflow at the same time, there is still 38mm distance between GPU and the front glass panel after installing vertical graphics card, keep cooling with the case. This widest case in all micro cases,the width of this case is 230mm, which will keep your system cooling.
BrandMUSETEX #ad
ManufacturerMUSETEX #ad
Height9 Inches
Length16.54 Inches
Weight12 Pounds
Width15.35 Inches
Part NumberMK7-
Modelfor Micro ATX
Warranty10 years warranty

6. Cooler Master

#ad

SD Card Reader, Sound-Dampened Steel Side Panel, Cooler Master Silencio S400 mATX Tower W/Sound-Dampening Material, Reversible Front Panel, and 2X 120mm PWM Silencio FP Fans

#ad
Cooler Master #ad - Silence fans – silence fp 120mm pwm 8001400 RPM fans for a whisper-quiet performance and rubber padding to reduce noise vibration.

Removable sound dampening cover – The top cover panel can be removed to increased ventilation when need. Sound dampening material – sound dampening material for optimal noise reduction front, both side panels and top. Sd card reader/ headset jack – the i/O panel features an SD card reader and single 4 pole headset jack for simultaneous Audio and microphone capabilities. Reversible, steel front door – a reversible mounting system allows the door to open from either side of the case.
BrandCooler Master #ad
ManufacturerCoolermaster #ad
Height16.06 Inches
Length8.27 Inches
Weight15.43 Pounds
Width16.46 Inches
Part NumberMCS-S400-KN5N-S00
ModelMCS-S400-KN5N-S00
Warranty1 Year

7. Fractal Design

#ad

Black, Mini Tower Computer Case, High Airflow, USB 3.0, Fractal Design Focus Mini G, 2X Fractal Design Silent LL Series 120mm White LED Fans Included, Window Side Panel, mATX

#ad
Fractal Design #ad - Contemporary micro atx case design: accommodates high-performance components with smart and efficient space utilization for a compact footprint. Filtered front, top and base air intakes for a dust free interior.

Showcase your hardware: large windowed side panel included. High airflow: 2x preinstalled fractal Design Silent Series LL 120 mm white LED fans with a total of six fan positions available. Flexible storage options: 2x vibration dampened universal drive Bays with support for 6 TB+ HDDs and 15 mm SSDs, Plus an additional 2. 5" mount behind the motherboard tray. Great cooling support: compatible with high-profile CPU coolers, multiple radiator configurations and graphics cards up to 380 mm long without compromising hard drive space.
BrandFractal Design #ad
ManufacturerFractal Design #ad
Height15.08 Inches
Length18.27 Inches
Weight1 Pounds
Width8.07 Inches
Part NumberFD-CA-FOCUS-MINI-BK-W
ModelFD-CA-FOCUS-MINI-BK-W
Warranty2 years

8. Fractal Design

#ad

Fractal Design Meshify C Mini -Compact Mini Tower Computer Case -mATX Layout -Airflow/Cooling -2X Fans Included -PSU Shroud -Modular Interior -Water-Cooling Ready -USB3.0 -Tempered Glass -Blackout

#ad
Fractal Design #ad - Open interior layout: unobstructed airflow path from front intake to rear exhaust. Remarkably compact matx design: the performance and capacity of a larger tower. Great cooling support: 2x preinstalled Fractal Design dynamic x2 gp-12 120 mm fans deliver optimum airflow with minimal noise.

Distinctive new styling with stealthy black-on-black aesthetic: designed angular mesh front panel maximizes air intake including lightly tinted tempered glass Side panel which offers users a clean and clear view of their components. Streamlined high-airflow design: the performance and capacity of a larger tower in a remarkably compact Mid-tower size. Flexible storage options: room for up to 5 drives with sturdy steel drive trays with vibration-dampening rubber grommets cushion hard drives for smooth, quiet and reliable operation. Motherboard compatibility- mATX, ITX.
BrandFractal Design #ad
ManufacturerFractal Design #ad
Height16.22 Inches
Length16.1 Inches
Weight13.85 Pounds
Width8.54 Inches
Part NumberFD-CA-MESH-C-MINI-BKO-TGD
ModelFD-CA-MESH-C-MINI-BKO-TGD
Warranty2 Year

9. BITFENIX

#ad

RTX 3090 or RX 6900 XT Ready, 3 ARGB Fans Included, White, Vertical GPU and Water Cooling Mounting, BitFenix Prodigy M 2022 mATX/Mini-ITX Gaming PC Case, USB 3.2 Type-C Port, Tempered Glass

#ad
BITFENIX #ad - High air flow with a pre-installed 6010 Fan Blowing Directly To GPU and a Mesh Front Panel. Reinforced design with strengthened Handles, Durable Matte Coating, and 1mm Thick Metal. Rtx 3090 or rx6900xt ready – gpu clearance up to 339mm with both Horizontal and Vertical Mounting Options. Easy access with usb 3. 2 gen 2 type-c connection, as well as 2xUSB 3. 0 type-A. 3x 120mm argb fans and 2x argb led included and Conveniently Customizable with SE Controller and SE Remote.
BrandBITFENIX #ad
ManufacturerBITFENIX #ad
Height33.46 Inches
Length23.62 Inches
Weight4.41 Pounds
Width23.62 Inches
Part Number4712883217746
Model4712883217746

10. Cooler Master

#ad

Adjustable I/O & Fully Ventilated Airflow, Black MCB-Q300L-KANN-S00, Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter, Transparent Acrylic Side Panel

#ad
Cooler Master #ad - Front magnetic design dust filter with open perforated front, top and bottom for high air performance. Extra space behind the motherboard tray for hidden cable management. Body depth height: Can support normal size ATX power supply. I/o panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal. Motherboard support: micro atx, radiator support front: 120mm/240mm, CPU Cooler: 159mm/6. 2", gpu 360mm, mini itx, rear: 120mm. Edge to edge acrylic transparent side panel offers a full view inside.
BrandCooler Master #ad
ManufacturerCoolermaster #ad
Height15 Inches
Length15.39 Inches
Weight1.06 Pounds
Width9.06 Inches
Part NumberMCB-Q300L-KANN-S00
ModelMCB-Q300L-KANN-S00