OP/TECH USA Mirrorless Neoprene Camera Wrist Strap Black

#ad
#ad
OP/TECH USA 1801041 #ad - It’s washable and available in black, steel, royal blue, and forest green. It also gives you the added peace of mind that if you need your hands free, you can simply let go of the camera and it’s securely attached around your wrist. Keeping gear conveniently at hand while also guarding its security is a must for the active photographer on the go!For added convenience and versatility, the Mirrorless Wrist Strap features a Mini Loop QD Connector.

Comfortable and flexible neoprene pad. The connector attaches to the camera with 1. 5 mm cord loop to fit even the tightest camera connection area. The pad is made from soft yet durable neoprene with a slide that tightens the strap snugly around the wrist for security and comfort. The mirrorless wrist strap is the perfect solution for carrying cameras that are larger than a point-and-shoot camera but smaller than a full-size SLR.

OP/TECH USA Mirrorless Neoprene Camera Wrist Strap Black #ad - Discover just how comfortable carrying a camera can be with OP/TECH USA's exclusive Mirrorless Wrist Strap. Recommended Load: Up to 2. 5 lbs 1. 33kgstrap length: 11" 27, 9cmpad dimensions: 1" x 5" 2, 7cm Ideal wrist strap for small SLR, 5cm x 12, lightweight mirrorless and compact cameras. Note: if your camera has lugs designed for split rings, we recommend attaching a split ring to avoid any sharp edges or burrs from cutting the cord.

It’s merely put through the camera connection area and then the small quick disconnect is passed through the open loop and then reattached to the main strap.

More information about OP/TECH USA 1801041 #ad

Oben BD-0 Mini Ball Head

#ad
#ad
Oben BD0 #ad - Low-profile yet strong for its size - supports up to 6. 6 lbsupports most 35mm and dslr cameras, as well as point & shoot modelsBall platform tilts 90°3/8"-16 mounting thread1/4"-20 reducer bushing Load Capacity: 6. 6 lb 3 kg ball Sphere Diameter: 062" 16mm quick release: no spirit level: no tension control: no separate panning Lock: No Tripod Mount Thread Size: 1/4"-20 and 3/8"-16 Height: 2.

0" 52mm base Diameter: 094" 24mm weight: 1. 8 oz 52 g single-lever adjustment | Supports Loads Up to 6. 6 lb. Or it can allow you to properly orient your camera on any other tripod model, whether it has a 1/4"-20 or a 3/8"-16 stud - the head has a 3/8" thread and comes with a reducer bushing to make it compatible with the 1/4"-type stud.

Oben BD-0 Mini Ball Head #ad - Constructed of aluminum, the BD-0 functions like most full-sized ball heads but features a supremely low-profile design. The bd-0 head can serve as a replacement head for an Oben TT-100, TT-200, or TT-300 table-top tripod. A single-action lever loosens the ball and allows it to move freely in all directions, and in addition,  a groove allows it to tilt 90° in one direction.

Weighs just 1. 8 oz. 90° tilt | accepts 1/4"-20 & 3/8"-16 Studs.

More information about Oben BD0 #ad


Similar products



Godox Dimmable Ultra Bright Portable 260LUX CN36 Continuous On Camera Led Light Panel for Camera Camcorder VideoFit Canon Sony Nikon Almost DSLR Camera

#ad
#ad
Godox LED36 #ad - Fits almost any dslr cameras and camcorders, and video recording, Used for macrophotography, product shooting, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness. Low power consumption, friendly environmental, and long service life. Support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects.

Seling by letwing digital support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects. Specifications: *model: LED36 * Power: 1. 3w *bulb qty:36 *batteries:2x aa batteries, not included in package *DC Power Supply: Not Available *Color Temperature: 5500 - 6500K *Brightness;260Lux0

Godox Dimmable Ultra Bright Portable 260LUX CN36 Continuous On Camera Led Light Panel for Camera Camcorder VideoFit Canon Sony Nikon Almost DSLR Camera #ad - 5m * brightness control:stepless *working temperature:-10 - 40 c *dimension:85 x 85 x 35mm *net weight:130g package include: 1 x led video light only no aa battery 1 x user manual letwing digital product line led lighting including:led36/64/126/160/170/308/500/1000 outdoor flash:ad180/360, rs600, qt400/600, tt520/560/660/680 etc 300W-800W Studio Strobe:SK300/400, GS300/400 etc 120W-300W Studio Strobe:250/300SDI, V860N/C, DE300/400, K-150/180, ES400 etc Flash Speedlite: ZT330new item, V850, H-120/160 etc All have its relevant accessories All have its kit series aim at different level Photographer.

In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty. All aluminum construction | Perfect for Table-Top Tripods. Weighs just 1. 8 oz.

More information about Godox LED36 #ad


Similar products



Herringbone Quick Release Camera Multi Plate for Manfrotto Dovetail Markins Arca

#ad
#ad
Herringbone H100501 #ad - Weighs just 1. 8 oz. In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty. There is alos a 1/4" hole for a different kind of head for your convenience. 90° tilt | accepts 1/4"-20 & 3/8"-16 Studs. The top side of the plate is padded with Chamoise, in order to protect the camera and the contact surface of the plate and to reduce unnecessary movement when in use.

Selling by letwing digital, also selling led64/126/160/308/500/1000 Continuous LED lighting. Fits almost any dslr cameras and camcorders, and video recording, product shooting, Used for macrophotography, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness.

Herringbone Quick Release Camera Multi Plate for Manfrotto Dovetail Markins Arca #ad - Low power consumption, friendly environmental, and long service life. Support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects. Combined dovetail type plate and Manfrotto type plate. Material: Aluminium / Chamois.

Multipurpose Camera Plate for camera with tripod mount. All aluminum construction | Perfect for Table-Top Tripods. The plate has combined dovetail type plate and Manfrotto type plate at the same time, so you can use this plate with any kinds of ball head.

More information about Herringbone H100501 #ad


Similar products



Impact FA-300HS Triple-Flash Hot Shoe Adapter Mount

#ad
#ad
Impact FA300HS #ad - The fa-300hs triple-flash hot shoe adapter Mount from Impact allows you to mount, sync and fire up to three flashes from this single adapter. All aluminum construction | Perfect for Table-Top Tripods. Built-in 3. 5mm jack for sync Cord | 3. 5mm jack Supports Wireless Receivers. This unique adapter features a female 1/4"-20 thread for universal mounting, light panel, and may be combined with an umbrella, or other lighting accessories all sold separately.

The mount has a 3. 5mm jack that allows you to use a sync cord to connect the adapter to your camera or wireless receiver. 90° tilt | accepts 1/4"-20 & 3/8"-16 Studs. Fits almost any dslr cameras and camcorders, product shooting, Used for macrophotography, and video recording, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness.

Impact FA-300HS Triple-Flash Hot Shoe Adapter Mount #ad - Low power consumption, friendly environmental, and long service life. Support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects. Combined dovetail type plate and Manfrotto type plate. If you own an impact powersync dc radio Slave System or a similar wireless unit, you can fire them all with a single receiver attached to the adapter.

Material: Aluminium / Chamois.

More information about Impact FA300HS #ad


Similar products



OP/TECH USA 1601512 Mirrorless Sling Black

#ad
#ad
OP/TECH USA 1601512 #ad - It allows the camera to be carried discretely at the side yet the camera glides easily up the strap into shooting position. The mirrorless Sling can be worn on the left or right shoulder. Limited 1-Year Warranty. When attached properly, the strap will be out of the way when in the shooting position. The sling can be attached using only this one connector if desired; however, the security tether can be easily attached to the other side of the camera for added peace of mind.

OP/TECH USA 1601512 Mirrorless Sling Black #ad - Neoprene pad with non-skid surface and comfort-stretch binding. Fully adjustable 27. 5"-32" 69, 9cm-81, 3cm; recommended load: up to 2. 5 lbs 1, 13 kg. Made in the USA. Material: Aluminium / Chamois. Weighs just 1. 8 oz. Size: 49mm x 41mm x 10mm, Weight: 40g. In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty.

90° tilt | accepts 1/4"-20 & 3/8"-16 Studs. Be sure to make it part of your essential gear! Single-lever adjustment | Supports Loads Up to 6.

More information about OP/TECH USA 1601512 #ad


Similar products



OP/TECH USA 1301112 Mini QD Loops - 1mm - System Connectors

#ad
#ad
OP/TECH USA 1301112 #ad - Mount & sync up to 3 flashes | Uses Standard 1/4"-20 Thread Mount. Weighs just 1. 8 oz. Single-lever adjustment | Supports Loads Up to 6. 6 lb. Fits almost any dslr cameras and camcorders, and video recording, Used for macrophotography, product shooting, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness.

Low power consumption, friendly environmental, and long service life. Support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects. Combined dovetail type plate and Manfrotto type plate. Limited 1-Year Warranty.

OP/TECH USA 1301112 Mini QD Loops - 1mm - System Connectors #ad - . Size: 49mm x 41mm x 10mm, Weight: 40g. Built-in 3. 5mm jack for sync Cord | 3. 5mm jack Supports Wireless Receivers. Contains four connectors each connector includes one female quick disconnect and one male with loop. 90° tilt | accepts 1/4"-20 & 3/8"-16 Studs. Fully adjustable 27.

More information about OP/TECH USA 1301112 #ad


Similar products



Insignia - Cold Shoe Flash/Video Light Mounting Arm

#ad
#ad
#ad - Mix and match Flash Brands on Adapter. Weighs just 1. 8 oz. In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty. Contains four connectors each connector includes one female quick disconnect and one male with loop. Easily attaches to strap with 3/8" quick disconnects. Made in the USA.

Use: multi-use plate for 200pl-14 manfrotto type & for Dovetail type Arca Swiss Markins Benro. 90° tilt | accepts 1/4"-20 & 3/8"-16 Studs. Selling by letwing digital, also selling led64/126/160/308/500/1000 Continuous LED lighting. Ideal sling-style strap for lightweight mirrorless cameras and other small SLR cameras.

Insignia - Cold Shoe Flash/Video Light Mounting Arm #ad - 1mm nylon cord loop works great with small connection points. Allows users to fasten small cameras to many OP/TECH USA neck straps. Neoprene pad with non-skid surface and comfort-stretch binding. Includes 1. 5mm mini qds for easy attachment and an additional Mini QD Extension for security lanyard. Single-lever adjustment | Supports Loads Up to 6.

6 lb. All aluminum construction | Perfect for Table-Top Tripods.

More information about #ad


Similar products



2 PackVKO Red Soft Metal Shutter Release Button Compatible for Fujifilm X-T3 X-T2 X100F X-T20 X-PRO2 X-E3 X30 X100T X100S X-E2 RX10 II III IV M6 M7 M8 M9 Camera 11mm Concave 10mm Convex Surface

#ad
#ad
VKO VRB-R1011 #ad - Includes 1. 5mm mini qds for easy attachment and an additional Mini QD Extension for security lanyard. In addition, it decorates your camera, which will make your camera look more stylish and elegant. Single-lever adjustment | Supports Loads Up to 6. 6 lb. 1mm nylon cord loop works great with small connection points.

Use: multi-use plate for 200pl-14 manfrotto type & for Dovetail type Arca Swiss Markins Benro. In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty. Weighs just 1. 8 oz. Additionally, the two kinds of release buttons with rubber ring. The rubber ring which is mainly used for Fujifilm X series cameras to ensure a tight attachment, while not for RX1 series cameras.

2 PackVKO Red Soft Metal Shutter Release Button Compatible for Fujifilm X-T3 X-T2 X100F X-T20 X-PRO2 X-E3 X30 X100T X100S X-E2 RX10 II III IV M6 M7 M8 M9 Camera 11mm Concave 10mm Convex Surface #ad - Mount & sync up to 3 flashes | Uses Standard 1/4"-20 Thread Mount. Technology: it's polished and enamel painted, every color is really beautiful. Size: 49mm x 41mm x 10mm, Weight: 40g. Compatibility: fujifilm x-pro2 / m-a / x100s / x20 / ae-1 fd mount nikon df / m7 / m2 / m3 / x-e3 xpro-1 / new f-1 / x-t10 leica m1 / x100 / rollei lm mount / m-e / m2 / x30 / x-e2s / m-p / m9 / x-e2 / m8 / m9-p / f3 sony rx1r ii  / rx10 ii minolta xd7 / m type 240 canon f-1 / x10 / m6 / m-monochrom / minolta sr-7 / olympus oM-1 PEN-F / SXT-2 / X-E1 / X-T2/ X100T / Hassellad 503CW Package: 1pcs 11mmdiameterconcave surface and 1pcs 10mmdiameterconvex surface red metal shutter release button with 4pcs rubber ring, other accessories not included.

Fits almost any dslr cameras and camcorders, and video recording, Used for macrophotography, product shooting, etc.

More information about VKO VRB-R1011 #ad


Similar products



OP/TECH USA System Connector Mini QD Step-Up

#ad
#ad
OP/TECH USA 1301202 #ad - Neoprene pad with non-skid surface and comfort-stretch binding. All aluminum construction | Perfect for Table-Top Tripods. The thinner cord loop connection of the system Connectors - Mini QD Step-Up makes it possible to attach to tight connection points on a camera and gives you more versatility in your choice of camera.

Ideal sling-style strap for lightweight mirrorless cameras and other small SLR cameras. Op/tech usa straps have always benefited from the ability to mix and match components by using our large selection of System Connectors in order to build a completely customized strap. 1mm nylon cord loop works great with small connection points.

OP/TECH USA System Connector Mini QD Step-Up #ad - Material: 100% made of quality brass, not the cheap aluminum alloy. Lets the user "step up" to a bigger OP/TECH USA strap. Easily attaches to strap with 3/8" quick disconnects. This allows for a quick change from a full-size D-SLR camera to a smaller camera in just a few seconds! Single-lever adjustment | Supports Loads Up to 6.

6 lb. Fits almost any dslr cameras and camcorders, product shooting, and video recording, Used for macrophotography, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness. Low power consumption, friendly environmental, and long service life.

More information about OP/TECH USA 1301202 #ad


Similar products



Powerextra 2 Pack Battery & Charger Compatible for Olympus BLS-5, BLS-50, PS-BLS5 and Olympus OM-D E-M10, Pen E-PL2, E-PL5, E-PL6, E-PL7, E-PM2, Stylus 1

#ad
#ad
Powerextra 1001962 #ad - In the box: reducer bushing for 1/4"-20 Studs, 5 Year Limited Manufacturer Warranty. Selling by letwing digital, also selling led64/126/160/308/500/1000 Continuous LED lighting. Fits almost any dslr cameras and camcorders, and video recording, product shooting, Used for macrophotography, etc. Lightweight and portable lights can be interlocked, so as to achieve different light brightness.

Low power consumption, friendly environmental, and long service life. Support interlocking multiple video lights,multiple lights can be interlocked together to strengthen lighting brightness and to get better lighting effects. Combined dovetail type plate and Manfrotto type plate. Special: package come with 2pcs rubber ring for each button, for Fujifilm X series cameras to ensure a tight attachment.

Powerextra 2 Pack Battery & Charger Compatible for Olympus BLS-5, BLS-50, PS-BLS5 and Olympus OM-D E-M10, Pen E-PL2, E-PL5, E-PL6, E-PL7, E-PM2, Stylus 1 #ad - All strict production processes ensure complete compatibility with OEM products. Made in the USA. All aluminum construction | Perfect for Table-Top Tripods. No memory effect, batteries can be charged or discharged at any time without harm. Built-in 3. 5mm jack for sync Cord | 3.

More information about Powerextra 1001962 #ad


Similar products

This article was written by metal